1610 Sutter St, San Francisco CA

What are the local zoning regulations for 1610 Sutter St ?

RM-4 (RESIDENTIAL- MIXED, HIGH DENSITY)

RM-4 districts are almost entirely made up of high-density apartment buildings, typically with smaller units, and are located near the downtown area.

The number of residential units in the RM-4 district is calculated based on the size of the lot. The minimum allowed is 3 units per lot, or 1 unit for every 267 sq ft of lot area, whichever is greater. The maximum allowed is 1 unit for every 200 sq ft of lot area.

Not allowed if it’s below the minimum density specified in the municipal code.

Dwelling Unit: A room or suite of two or more rooms that is designed for, or is occupied by, one family doing its own cooking therein and having only one kitchen.

Accessory Dwelling Unit (ADU): Also known as a Secondary Unit or In-Law Unit. It is accessory to at least one other Dwelling Unit on the same lot. A detached ADU should not share structural walls with the primary structure on the lot.

Junior Accessory Dwelling Unit (JADU): JADU is a secondary living space within a single-family home, limited to 500 square feet. It must have its own entrance, an efficiency kitchen, and can either share or have separate sanitation facilities. The property owner must live on-site unless a government agency, land trust, or housing organization owns the unit.

These Districts, despite the intensity of development, should still aim for distinct building styles, moderated façades, and open spaces for residents in new projects.

The primary use of the Residential - Mixed, High Density zone is residential. The Permitted uses listed below show that additional land uses may be allowed in this zone.

Permitted Residential Uses: ADU, intermediate length occupancy use, single room occupancy, dwelling units, student housing, senior housing, residential density, group housing, and homeless shelter.

Permitted Non-Residential Uses: Agriculture, passive outdoor recreation, child care facility, public facilities, and residential care facility.

What is the maximum height for 1610 Sutter St ?

50-X

The height of a dwelling cannot exceed 50 feet.

To promote taller ground floor ceilings for commercial and active uses, improve light and air in ground-level spaces, and allow ground floor residential units to be slightly elevated for privacy and usable stoops, buildings located along major streets in NCT and designated areas of NC-1, NC-2, and NC-3 districts may exceed the height limit by up to 5 feet, provided they include either higher ceilings for non-residential spaces or walk-up residential units raised above sidewalk level.

Building height is measured from the centerline of the building. If the building steps laterally along a street, separate measurements are taken from the centerline of each step. For flat roofs, height is measured to the highest point of the finished roof, while for pitched or stepped roofs, it is measured to the average height of the rise.

What are the ADU regulations for 1610 Sutter St ?

ADU eligible

Accessory Dwelling Units (ADUs), also called secondary units, in-law units, or cottages, are units added to existing and new residential buildings. Adding an ADU to your property can provide several benefits, such as providing housing for family members, simplifying your lifestyle, and increased financial flexibility.Learn more about building ADUs

What neighborhood is 1610 Sutter St located in?

Lower Pacific Heights, San Francisco

Lower Pacific Heights, also known as Upper Fillmore, has a rich heritage, soulful origins, and a thriving cosmopolitan blend just diwn the hill fro its larger, tonier sister. Lower Pacific Heights' diversified dining, entertainment, and shopping opportunities reflect its diverse surroundings.